- BNC Connector
- Fakra Connector
- FME Connector
- MCX Connector
- MMCX Connector
- N Connector
- QMA Connector
- QN Connector
- RP N Connector
- RP SMA Connector
1.13mm Low Loss, Stranded Conductors, Tin Shielding, 50ohm
Downloads
|
Conductor (A) |
Insulation (B) |
Binder (C) |
Braid Shield (D) |
Jacket (E) |
|
|---|---|---|---|---|---|
|
Diameter/Structure |
AWG32 (7/0.085 mm) |
0.70 mm |
- |
16/4/0.05 mm |
1.13 mm |
|
Material |
Silver Plated Copper |
FEP | Cu-PET | Tin Plated Copper | FEP |
General Specification
- Impedance: 50 ohm
- Operating Temperature: -40°C ~ + 200°C
- Minimum Bend Radius: 5 mm
1.13mm Low Loss Coax Cable has Cu/PET tape between Insulation and Braid Shield. This provides lower loss in signal transmission and offer better shielding from signal interference and is the preferred cable option for higher frequency over 6GHz.
More information about 1.13mm Low Loss Cable Attenuation, Bend Radius, Shield Coverage, Diameter and Electrical properties, please refer to cable specification.
1.13mm Low Loss cable Commonly terminated with:
- MMCX connectors
- MCX connectors
- SMA connectors
- SMB connectors
- TNC connectors
- BNC connectors
- N connectors
- Miniature RF Plug (IPEX MHF、IPEX MHF2、IPEX MHF3、IPEX MHF4、IPEX MHF4L、Hirose U.FL)
