1.13mm Low Loss, Stranded Conductors, Tin Shielding, 50ohm

Product Number: D113L115GT 【Gray Jacket】

D113L115XT CABLE SPEC.

Description

Coaxial Cable結構圖_官網_03

	Conductor (A)	Insulation (B)	Binder (C)	Braid Shield (D)	Jacket (E)
Diameter/Structure	AWG32 (7/0.085 mm)	0.70 mm	-	16/4/0.05 mm	1.13 mm
Material	Silver Plated Copper	FEP	Cu-PET	Tin Plated Copper	FEP

General Specification

Impedance: 50 ohm
Operating Temperature: -40°C ~ + 200°C
Minimum Bend Radius: 5 mm

1.13mm Low Loss Coax Cable has Cu/PET tape between Insulation and Braid Shield. This provides lower loss in signal transmission and offer better shielding from signal interference and is the preferred cable option for higher frequency over 6GHz.

More information about 1.13mm Low Loss Cable Attenuation, Bend Radius, Shield Coverage, Diameter and Electrical properties, please refer to cable specification.

1.13mm Low Loss cable Commonly terminated with:

MMCX connectors
MCX connectors
SMA connectors
SMB connectors
TNC connectors
BNC connectors
N connectors
Miniature RF Plug (IPEX MHF、IPEX MHF2、IPEX MHF3、IPEX MHF4、IPEX MHF4L、Hirose U.FL)

Related Products

SMA Female Straight Bulkhead w/Oring for 1.13, 1.13LL, 50ohm, 6GHz

C02AD31113005

IPEX MHF4L to 1.13LL(GR) to IPEX MHF4L, L=VARY, 12GHz

SMA Female Straight Bulkhead for 1.13, 1.13LL, 50ohm, 6GHz

C02AB31113003

SMA Female Straight, 2-Hole Panel Mount for 1.13, 1.13LL, 50ohm, 6GHz

C02AF31113007

IPEX MHF to 1.13LL(GR) to MCX(M) st., L=VARY, 6GHz

IPEX MHF to 1.13LL(GR) to SMA(F) bh. front mount wOring, L=VARY, 6GHz

SMA Female Straight Bulkhead Front Mount w/Oring for 1.13, 1.13LL, 50ohm, 6GHz

C02AU31113032B

SMA Female Straight Bulkhead for 1.13, 1.13LL, 50ohm, 12.4GHz

C02AB31113003-3

SMA Female Right Angle Bulkhead for 1.13, 1.13LL, 50ohm, 6GHz

C02BB31113017

IPEX MHF4L to 1.13LL(GR) to RP SMA(F) bh. front mount wOring, 5psi, L=VARY, 6GHz

1.13mm Low Loss, Stranded Conductors, Tin Shielding, 50ohm

D113L115XT

SMB Plug Right Angle Crimp for 1.13, 1.13Low Loss, 50ohm, 4GHz

C03BA3F113001B

IPEX MHF4L to 1.13LL(GR) to SMA(M) st., L=VARY, 6GHz

IPEX MHF to 1.13LL(GR) to N(F) bh. wOring, L=VARY, 6GHz

IPEX MHF to 1.13LL(GR) to RP SMA(F) bh. wOring, 5psi, L=VARY, 4GHz

IPEX MHF4L to 1.13LL(GR) to SMA(F) bh. wOring, isolated, IP67, L=VARY, 6GHz

IPEX MHF to 1.13LL(GR) to SMA(F) bh. wOring, 5psi, L=VARY, 4GHz

IPEX MHF4L to 1.13LL(GR) to SMA(F) st., L=VARY, 6GHz

IPEX MHF4L to 1.13LL(GR) to SMA(F) bh. wOring, Thread L13.7, L=VARY, 12GHz

SMA Plug Straight Crimp for 1.13, 1.13Low Loss, 50ohm, 12GHz

C01AA31113004-1

MCX Jack Straight Bulkhead Crimp for 1.13, 1.13Low Loss, 50ohm, 6GHz

C08AB31113002B-1

IPEX MHF4L to 1.13LL(GR) to SMA(F) bh., L=VARY, 6GHz

IPEX MHF4L to 1.13LL(GR) to SMA(F) bh. front mount wOring, L=VARY, 6GHz

SMA Female Right Angle Bulkhead for 1.13, 1.13LL, 50ohm, 6GHz, 1% LEAD

C02BB311130L17

IPEX MHF4L to 1.13LL(GR) to IPEX MHF, L=VARY, 9GHz

MMCX Jack Straight Crimp for 1.13, 1.13Low Loss, 50ohm, 6GHz

C06AA3F113006C

MCX Plug Right Angle Crimp for 1.48, 50ohm, 6GHz

C07BA31148001A-1

SMA Female Straight Bulkhead, 2.3mm Panel thickness for 1.13, 1.13LL, 50ohm, 6GHz

C02AB31113003E

IPEX MHF to 1.13LL(GR) to SMA(F) ra. bh., L=VARY, 6GHz

IPEX MHF to 1.13LL(GR) to SMA(F)bh. w/EPDM Oring, SUS303, 5psi, L=VARY, 9GHz