1.37mm Low Loss, Stranded Conductors, Tin Shielding, 50ohm

Product Number: D137L115BT 【Black Jacket】

D137L115XT CABLE SPEC.

Description

Coaxial Cable結構圖_官網_03

	Conductor (A)	Insulation (B)	Binder (C)	Braid Shield (D)	Jacket (E)
Diameter/Structure	7/0.102 mm	0.89 mm	-	16/6/0.05 mm	1.37 mm
Material	Silver Plated Copper	FEP	Cu-PET	Tin Plated Copper	FEP

General Specification

Impedance: 50 ohm
Operating Temperature: -40°C ~ + 200°C
Minimum Bend Radius: 6 mm

1.37mm Low Loss Coax Cable has Cu/PET tape between Insulation and Braid Shield. This provides lower loss in signal transmission and offer better shielding from signal interference and is the preferred cable option for higher frequency over 6GHz.

More information about 1.37mm Low Loss Cable Attenuation, Bend Radius, Shield Coverage, Diameter and Electrical properties, please refer to cable specification.

1.37mm Low Loss cable Commonly terminated with:

MMCX connectors
MCX connectors
SMA connectors
SMB connectors
TNC connectors
BNC connectors
N connectors
IPEX MHF、IPEX MHF4L

Related Products

IPEX MHF to 1.37LL(BK) to FME(M) bh. wOring, L=VARY, 3GHz

IPEX MHF to 1.37LL(BK) to RP N(F) bh. wOring, 5psi, L=VARY, 4GHz

IPEX MHF to 1.37LL(BK) to SMA(F) bh. front mount wOring, 5psi, L=VARY, 9GHz

IPEX MHF to 1.37LL(BK) to SMA(F) st. PCB, L=VARY, 9GHz

IPEX MHF to 1.37LL(BK) to RP TNC(F) bh. wOring, 5psi, L=VARY, 4GHz

IPEX MHF4L to 1.37LL(BK) to SMA(F) st. PCB, L=VARY, 6GHz

IPEX MHF to 1.37LL(BK) to BNC(F) bh. front mount wOring, L=VARY, 4GHz

IPEX MHF to 1.37LL(BK) to RP SMA(F) st. PCB, L=VARY, 9GHz

IPEX MHF to 1.37LL(BK) to SMA(F) bh., L=VARY, 4GHz

IPEX MHF to 1.37LL(BK) to SMA(F) 4-hole Flange, L=VARY, 9GHz

SMA Female Straight Bulkhead w/Oring for 1.37, 1.37LL, 50ohm, 6GHz

C02AD31137005

IPEX MHF to 1.37LL(BK) to SMA(F) bh. wOring, 5psi, L=VARY, 9GHz

IPEX MHF4L to 1.37LL(BK) to SMA(F) ra. bh. front mount wOring, L=VARY, 6GHz

IPEX MHF4L to 1.37LL(BK) to RP SMA(F) bh. wOring, L=VARY, 9GHz

IPEX MHF to 1.37LL(BK) to MMCX(M) ra., L=VARY, 6GHz

MCX Plug Straight Crimp for 1.37, 1.37Low Loss, 50ohm, 6GHz

C07AA31137004A

IPEX MHF to 1.37LL(BK) to N(F) bh. wOring, L=VARY, 6GHz

IPEX MHF to 1.37LL(BK) to N(F) bh. front mount wOring, 5psi, L=VARY, 4GHz

IPEX MHF to 1.37LL(BK) to SMA(F) ra. bh. front mount wOring, L=VARY, 9GHz

IPEX MHF to 1.37LL(BK) to RP SMA(F) ra. bh. front mount wOring, L=VARY, 9GHz

SMA Female Straight for 1.37, 1.37LL, 50ohm, 6GHz

C02AA31137012C

IPEX MHF to 1.37LL(BK) to SMA(F) bh. wOring, Panel T2.2, L=VARY, 9GHz

IPEX MHF4L to 1.37LL(BK) to Open, L=VARY, 12GHz

IPEX MHF to 1.37LL(BK) to RP SMA(F) ra. bh., L=VARY, 9GHz

MCX Jack Straight Bulkhead Crimp for 1.37, 1.37Low Loss, 50ohm, 6GHz

C08AB31137002B-1

IPEX MHF to 1.37LL(BK) to Fakra(M) st. Latch Lock, D code(Violet), L=VARY, 4GHz

IPEX MHF4L to 1.37LL(BK) to RP SMA(F) ra. bh. wOring, 5psi, L=VARY, 6GHz

MMCX Plug Right Angle Crimp for 1.37, 1.37Low Loss, RG178, 50ohm, 6GHz

C05BA3F178001

IPEX MHF4L to 1.37LL(BK) to SMA(M) st., L=VARY, 9GHz

IPEX MHF to 1.37LL(BK) to SMA(F) bh., L=VARY, 9GHz