- BNC Connector
- Fakra Connector
- FME Connector
- MCX Connector
- MMCX Connector
- N Connector
- QMA Connector
- QN Connector
- RP N Connector
- RP SMA Connector
[yith_ywraq_button_quote]
Fakra Jack(Female) Straight for RG58, RF195, 50ohm, 4GHz, I code (Beige)
Downloads
RF Connector SMA Female Straight Bulkhead w/Oring for 1.37, 1.37LL, 50ohm, 6GHz
Applications:
Antenna
Microwave Components
Instrument
Vehicle Tracking System
Cellular Mobile System
Wireless System
SMA Connector Features and Benefits:
1/4”-36 Thread Coupling for Vibration-Proof:
The 1/4”-36 thread coupling provides a vibration-proof option, ensuring a secure and stable connection even in environments prone to vibrations.
Wide Frequency Range Options: DC-6GHz, DC-10GHz, DC-18GHz:
Choose from a range of frequency options, including DC-6GHz, DC-10GHz, and DC-18GHz, catering to diverse application requirements with precision and versatility.
Material Options: Brass and Stainless Steel for Varied Environments:
Opt for either brass or stainless-steel materials, offering choices to suit different environmental conditions, providing durability and corrosion resistance.
Versatile Design Options:
Cable connectors are designed for miniature coaxial cable, Low Loss cable, semi-flex, and semi-rigid cables.
PCB connectors are available in Through-Hole, Surface Mounting, and Edge Mounting configurations.
Panel connectors offer diverse mounting options, including 2-Hole, 4-Hole, and Bulkhead Panel Mounting.
FAQ:
Is this Fakra connector available in other color codes, and is there a minimum order quantity (MOQ)?
This connector is an I-code (beige) Fakra female/jack, designed to match the standardized color-coded system for automotive applications. It is not interchangeable with other codes (e.g., C, D, K). However, Z code Fakra male/plug can mate with it because Z code is designed for all codes. The typical MOQ is 500 pieces, but we offer flexible order quantities depending on the project needs.
Step1. Get all parts of Fakra RF connector ready as connector drawing showes.
Step2. Strip the RF coaxial cable into center conductor, insulator, shielding three parts per recommended stripping dimension shown in Fakra RF connector spec.
Step3. Slide the heat shrinking tube, then ferrule onto the cable jacket.
Step4. Insert the center conductor of the cable into the contact pin of Fakra female/jack and then solder through the side hole.
Step5. Spread out the shielding and put the contact pin into main body until it stops, and then cover shielding onto the knurled barrel.
Step6. Slide the ferrule over the shielding, and proceed the first open-short test to make sure signal can transmit well.
Step7. Crimp the ferrule.
Step8. Heat shrink the shirking tube.
Step9. Do the open-short test for the fully assembled Fakra female cable.
切換內容
| Parts Status | Active |
| Series | Fakra |
| Gender | Female Body/Female Pin |
| Coupling Mechanism | Fakra Locking |
| Orientation | Straight |
| Termination Style | Cable-Crimp |
| Contact Termination | Crimp |
| Ground Termination | Crimp |
| Mounting Type | Not Applicable |
| Mounting Feature | Not Applicable |
| IP Rating | Not Rated |
| Terminates to Cable | RG58, RF195 |
| Isolated | No |
| Extended Dielectric | No |
| Impedence | 50ohm |
| Frequency (Max.) | 4GHz |
| VSWR (Max.) | 1.5 |
| Body Material | Brass |
| Body Finish | Nickel |
| Center Contact Material | Phosphor Bronze |
| Center Contact Finish | Gold |
| Dielectrica Material | Teflon(PTFE) |
| Temp. (Max.) | 100℃ |
| Temp. (Min.) | -40℃ |